1999-2003 7.3 Super Duty/ Excursion Standard Battery Cable Set
The factory battery cables are prone to cause all sorts of concerns, and on early year trucks the passenger side positive terminal is unnecessarily large and impractical. We eliminate that with the use of military style terminals. The factory crossover cable is 2 AWG, which doesn’t support enough current as it should, as well as the factory copper just isn’t made to last. We’ve eliminated all weak points of the factory cables. We use marine grade 1/0 AWG tinned pure copper cable for both drivers and passenger side grounds, as well as the power crossover cable from drivers side to passenger side battery. We use 2 sets of military terminals in each set, allowing you to run practically any accessory you could want! While not having to worry about over tightening and damaging the entire cable. We use a 4 AWG wire from the battery to feed the fender mounted relay, then a 12 AWG wire to feed the starter solenoid. And the starter supply is a massive 2/0 AWG cable, and that includes a 1500 degree protective heat sleeve. Everything is tinned pure copper, with super thick protective coating, guaranteeing that corrosion will never happen, we then use tinned copper lugs on all connections with adhesive lined heat shrink to ensure a tight seal. And on top of that we cover our wire in a abrasion resistant, heat resistant tight weave loom, it adds even more protection, as well as looks awesome. We use factory style retainer clips on the crossover cable so you have a factory style look, fit, and install.
You’ll have quicker starts, more efficient charging, as well as much better overall battery health. Factory mounting hardware retained, to ensure a nearly factory like fit. The best upgrade your charging and starting system could use!
Key Features
*LIFETIME WARRANTY!
*Tinned Oxygen Free Copper Cable, marine grade
*tape, zip ties, and installation accessories included
*Solid Zync Military Style Battery Terminals
*see Contact us for current build time
The factory battery cables are prone to cause all sorts of concerns, and on early year trucks the passenger side positive terminal is unnecessarily large and impractical. We eliminate that with the use of military style terminals. The factory crossover cable is 2 AWG, which doesn’t support enough current as it should, as well as the factory copper just isn’t made to last. We’ve eliminated all weak points of the factory cables. We use marine grade 1/0 AWG tinned pure copper cable for both drivers and passenger side grounds, as well as the power crossover cable from drivers side to passenger side battery. We use 2 sets of military terminals in each set, allowing you to run practically any accessory you could want! While not having to worry about over tightening and damaging the entire cable. We use a 4 AWG wire from the battery to feed the fender mounted relay, then a 12 AWG wire to feed the starter solenoid. And the starter supply is a massive 2/0 AWG cable, and that includes a 1500 degree protective heat sleeve. Everything is tinned pure copper, with super thick protective coating, guaranteeing that corrosion will never happen, we then use tinned copper lugs on all connections with adhesive lined heat shrink to ensure a tight seal. And on top of that we cover our wire in a abrasion resistant, heat resistant tight weave loom, it adds even more protection, as well as looks awesome. We use factory style retainer clips on the crossover cable so you have a factory style look, fit, and install.
You’ll have quicker starts, more efficient charging, as well as much better overall battery health. Factory mounting hardware retained, to ensure a nearly factory like fit. The best upgrade your charging and starting system could use!
Key Features
*LIFETIME WARRANTY!
*Tinned Oxygen Free Copper Cable, marine grade
*tape, zip ties, and installation accessories included
*Solid Zync Military Style Battery Terminals
*see Contact us for current build time
The factory battery cables are prone to cause all sorts of concerns, and on early year trucks the passenger side positive terminal is unnecessarily large and impractical. We eliminate that with the use of military style terminals. The factory crossover cable is 2 AWG, which doesn’t support enough current as it should, as well as the factory copper just isn’t made to last. We’ve eliminated all weak points of the factory cables. We use marine grade 1/0 AWG tinned pure copper cable for both drivers and passenger side grounds, as well as the power crossover cable from drivers side to passenger side battery. We use 2 sets of military terminals in each set, allowing you to run practically any accessory you could want! While not having to worry about over tightening and damaging the entire cable. We use a 4 AWG wire from the battery to feed the fender mounted relay, then a 12 AWG wire to feed the starter solenoid. And the starter supply is a massive 2/0 AWG cable, and that includes a 1500 degree protective heat sleeve. Everything is tinned pure copper, with super thick protective coating, guaranteeing that corrosion will never happen, we then use tinned copper lugs on all connections with adhesive lined heat shrink to ensure a tight seal. And on top of that we cover our wire in a abrasion resistant, heat resistant tight weave loom, it adds even more protection, as well as looks awesome. We use factory style retainer clips on the crossover cable so you have a factory style look, fit, and install.
You’ll have quicker starts, more efficient charging, as well as much better overall battery health. Factory mounting hardware retained, to ensure a nearly factory like fit. The best upgrade your charging and starting system could use!
Key Features
*LIFETIME WARRANTY!
*Tinned Oxygen Free Copper Cable, marine grade
*tape, zip ties, and installation accessories included
*Solid Zync Military Style Battery Terminals
*see Contact us for current build time
Please specify the year of super duty some 2002-2003 trucks use a solenoid connector and not a fender mounted starter relay. Will need to know which style to ensure proper fit.